|CONTACT US (Mail link) | +44779 (or 0779) 5566801(Phone)|
|TIP... PRICES: YOU CAN SAVE A VAST AMOUNT - WE CAN BEAT MOST PUBLISHED PRICES - IF YOU COME TO SEE US!|
|AMPLIFIER HOMEPAGE MAIN HOMEPAGE|
TIP... PRICES: YOU CAN
SAVE A VAST AMOUNT
- WE CAN BEAT MOST PUBLISHED PRICES
- IF YOU COME TO SEE US!
|Micro Amp Series™|
1 Watt of gut-wrenching power featuring: channel
switching, a battery and a headphone jack that doubles as a preamp out,
so you can rock while you roll.
Full Stack Mini The MS-4, the black full stack, is the ultimate in micro rock ‘n’ roll. With separate Gain and Volume controls, you can go from clean to full shred and anywhere in between. The MS-4 also features a pull-out stand for upward angled sound projection.
MS-2 (BLK) £22.00
MS2-C (GREY) £22.00
MS-4 (STACK) £30.00
Special (Last Few)
|MG10CF With all the essentials for getting tone just right, the no-nonsense 10 Watt MG10CF has Clean and Overdrive channels, with a Contour control on the Overdrive channel, so you can fine-tune your tone. Loaded with a custom 6.5″ speaker, the MG10C also features a handy MP3/Line In for jamming along to a track, and an emulated Headphone output for great sounding ‘silent’ practice.|
|General MODEL MG10CF RANGE MG CARBON FIBRE™ TECHNOLOGY SOLID STATE Channel 2 Electronics WATTAGE 10W INPUTS 1 (+AUDIO) CONTROLS VOLUME x 2, GAIN, CONTOUR Speakers SIZE 1 x 6.5" OUTPUT POWER 10W IMPEDANCE 8 Ohm Accessories CABLES POWER Dimensions WEIGHT (KG) 4.8 DIMENSIONS in mm (W x H x D) 315 x 295 x 180 Other UNIQUE|
Special GB Music Deal £79
The MG15CFR is a ‘no frills’ 15
Watt, 1 x 8” combo, and although small in stature, it’s big on sound,
packing a powerful Marshall® punch that will knock out ‘bigger’
competitors with ease – enough to practise with, yet loud enough to
entertain a small crowd.
The Clean and Overdrive channels share three-band EQ for excellent tonal control. There is also a handy MP3/Line In for jamming along to a track, and an emulated Headphone output for great sounding ‘silent’ practice. The MG15CFR is equipped with a retro-style spring Reverb.
|General MODEL MG15CFR RANGE MG CARBON FIBRE™ TECHNOLOGY SOLID STATE CHANNELS 2 Electronics WATTAGE 15W INPUTS 1 (+AUDIO) CONTROLS VOLUME x 2, GAIN, BASS, MIDDLE, TREBLE, REVERB Speakers SIZE 1 x 8" OUTPUT POWER 15W IMPEDANCE 8 Ohm Accessories CABLES POWER Dimensions WEIGHT (KG) 7.4 DIMENSIONS in mm (W x H x D) 385 x 380 x 210 Other EFFECTS|
GB Music £99
combines Marshall’s® famous solid-state tonal circuitry
with modern digital FX. Choose from Reverb, Chorus, Phaser, Flanger,
Delay (tap-tempo) and Octave (fixed).
There are four channels, Clean, Crunch, OD1 and OD2, which when in Manual mode operate like any ‘normal’ amp. When in Preset mode, whatever settings you dial-in can be stored, so that when you switch to that channel, your settings will be recalled.
The MG15CFX is 15 Watts and is loaded with an 8” Custom speaker.
|General MODEL MG15CFX RANGE MG CARBON FIBRE™ TECHNOLOGY SOLID STATE CHANNELS 2 Electronics WATTAGE 15W INPUTS 1 (+AUDIO) CONTROLS GAIN, VOLUME, BASS MIDDLE, TREBLE, REVERB, FX SELECT, MASTER, CHANNEL SELECT x 2, TAP, STORE Speakers SIZE 1 x 8" OUTPUT POWER 15W IMPEDANCE 8 Ohms Accessories FOOTSWITCH OPTIONAL PEDL-90008 NOT INCLUDED CABLES POWER Dimensions WEIGHT (KG) 7.7 DIMENSIONS in mm (W x H x D) 385 x 380 x 210 Other EFFECTS UNIQUE MASTER VOLUME|
The latest version MG15GFX
This one JUST £115
With four channels, clean, crunch, OD1 and OD2, as well as three band EQ, there’s a tone out there for everyone. The MG15FX has clean, crunch, OD1 and OD2 channels, bringing you even more tonal control.
MG30CFX amplifier is part of the MG "Carbon" Series from
Although both it's looks and circuitry have had a bit of a re-vamp, the MG "Carbon" Series amplifiers still produces the type of tone other amplifiers can only try to imitate. By developing reliable high quality solid-state analogue circuitry and combining it with the flexibility of digital control the Marshall MG30CFX provides access to a vast range of quality tonal options.
The Marshall MG30CFX offers a fully programmable feature set, utilising digitally controlled analogue functions for precise adjustment to your sound. For each mode you can individually store your preferred setting by simply adjusting the front panel controls to your desired positions and then pressing the store button.
The Marhsall MG30CFX is compatible with the revolutionary 'Stompware' enabled foot controller (sold separately), which utilises the exclusive Marshall Amplification patented switching technology for seamless changes. The foot controller also provides access to the onboard tuner feature in the amplifier. This means you can tune up quickly and accurately without having to carry any separate pedals or hand held equipment with you.
A step up from the MG15 and MG30 combos, the MG50CFX is a gig-worthy amp with four channels: Clean, Crunch, OD1 and OD2, driven by famed MarshallÂ® solid-state tonal circuitry, and features our innovative speaker damping (FDD) technology.
It has an impressive selection of digital FX. In addition to the Chorus, Phaser, Flanger and Octave (fixed), the MG50CFX has a Vibe effect, two Reverb types, and an independent Delay section which consists of: hi-fi, tape, multi and reverse delays.
This incredible selection of FX and channels are switchable remotely using our revolutionary Stompware® footswitching technology*, developed originally for the JVM® Series amps.
The MG50CFX is loaded with a single 50 Watt 12" Custom speaker.
|Marshall Code 25 25Watt 1x10" Digital Combo Amp|
|Pre-loaded with 100 presets, the CODE25TM has all you need to find your sound at home. Its 25w mean it’s even powerful enough to start gigging with. Fully programable via your phone and online, CODE25 is the amp for on the go.|
Fully programmable, CODE combines authentic modelling of
classic and contemporary Marshall tones with professional quality FX.
CODE preamp, power amp and speaker cabinet models have been developed in
collaboration with audio software pioneers Softube to create Marshall-Softube
(MST) modelling, highly accurate recreations of classic and contemporary
Marshall products and more.
CODE has 14 MST preamps, 4 MST power amps and 8 MST speaker cabinets. It has 24 FX including: Compressor, classic stompbox Distortions, Auto Wah, Pitch Shifter, Chorus, Phaser, Flanger and Tremolo. It includes Delays with Tap Tempo, and studio quality Reverbs. CODE’s MST preamps produce some of the most acclaimed and best loved Marshall tones: JTM45 2245, 1962 Bluesbreaker, 1959SLP Plexi, JCM800 2203, JCM2555 Silver Jubilee, JCM2000 DSL100, JVM410H and more. CODE features EL34, 5881, EL84 & 6L6 MST power amp voicings, and MST speaker cabinet models: 1960, 1960V, 1960AX, 1960HW, 1936, 1936V, 1912 & 1974X.
Connect via Bluetooth® to control CODE and to stream music from your iOS or Android device using the GatewayTM App. Connect via USB to use CODE as a DAW interface to record, and to stream audio from you computer. Connect your MP3 player via CODE’s dedicated audio input to jam along with your favourite tracks or plug headphones in for a personal CODE experience. Connect CODE’s programmable footcontroller* to assign up to 30 Presets or control panel functions.
The CODE25 has 14 MST preamps, 4 MST power amps and 8 MST speaker cabinets for you to play and create sounds that suit you.
Connect via Bluetooth to control CODE and stream music from your iOS or Android device using the Gateway App.
Upload and download to the global library of user presets using MyMarshall
|Marshall Code 50 50Watt 1x12" Digital Combo Amp|
SALE BLOW OUT ON NEW STOCK £199
line of amplifiers show what you can do with a large library of all
valve amps and an amazing team of software designers. After teaming up
with the incredible team at Softube, Marshall have created the Code 50 a
small and lightweight combo filled with 14 modelled preamps, 4 power
amps and 8 speaker cabinets on top of 24 effects. This is truly every
Marshall in a box.
Every King Of Marshall - We can't believe just how many different amps Marshall and Softube worked on modelling and just how good the models are. The 14 MST preamp modules cover everything from classic Bluesbreakers the hard rocking JCM800 and even up to modern JVM and DSL tones. Cabinet wise they again have covered every kind of cab Marshall make from the small 1x12" 1912 to the mammoth 4x12" 1960A. The final part they modelled was the power amplifier. Here you have four main options based on the different kind of amps you will see day to day. The EL34 filled Marshall 100w, 5881 filled Vintage Marshall 30w, a more american A/B 5881 Power amp and a small British Class A EL84 designed option. These can all be mixed and matched to form your dream Marshall tone.
24 FX Built In - Moving on from the amps you have a collection of pretty much any effect you will ever need. Compressor, Distortions, Auto Wah, Pitch Shifter, Chorus, Flanger, Phaser and Tremolo on top of the studio quality Reverbs and tap tempo Delays. All of these can be accessed either on the amp, using the Marshall Gateway app or using the programmable controller (sold separately)
Mid Sized Powerhouse - The Marshall Code 50 is easliy loud enough for small gigs, rehearsals and as it is digital can even be turned down low enough for home use. With 50w pushing a 12" speaker this amplifier has a lot of punch and power coming out of it that make it the perfect amp if you want every kind of Marshall for every kind of situation.
Gateway App and Connectivity - So to give you more control over the sound than Marshall could physically fit on the top of the amp the Code series use an amp for when you really need to dig in deep. With this app you can on the fly change your settings, create presets, manage the amp and even stream music straight to the amp via Bluetooth. Here's what Marshall say about the Code 50 "Fully programmable, CODE combines authentic modelling of classic and contemporary Marshall tones with professional quality FX. CODE preamp, power amp and speaker cabinet models have been developed in collaboration with audio software pioneers Softube to create Marshall-Softube (MST) modelling, highly accurate recreations of classic and contemporary Marshall products and more.
CODE has 14 MST preamps, 4 MST power amps and 8 MST speaker cabinets. It has 24 FX including: Compressor, classic stompbox Distortions, Auto Wah, Pitch Shifter, Chorus, Phaser, Flanger and Tremolo. It includes Delays with Tap Tempo, and studio quality Reverbs. CODE's MST preamps produce some of the most acclaimed and best loved Marshall tones: JTM45 2245, 1962 Bluesbreaker, 1959SLP Plexi, JCM800 2203, JCM2555 Silver Jubilee, JCM2000 DSL100, JVM410H and more. CODE features EL34, 5881, EL84 & 6L6 MST power amp voicings, and MST speaker cabinet models: 1960, 1960V, 1960AX, 1960HW, 1936, 1936V, 1912 & 1974X.
Connect via Bluetooth to control CODE and to stream music from your iOS or Android device using the GatewayTM App. Connect via USB to use CODE as a DAW interface to record, and to stream audio from you computer. Connect your MP3 player via CODE's dedicated audio input to jam along with your favourite tracks or plug headphones in for a personal CODE experience. Connect CODE's programmable footcontroller* to assign up to 30 Presets or control panel functions.
|Marshall PEDL-91009 Four Way Footswitch (For Marshall Code Amps)|
GB Music £39
GB Music £225
The 50 Watt AS50D
has two specially designed 8″ Celestion® speakers and a
high fidelity polymer dome tweeter, for rich clean tones and brilliant
highs. Designed for a variety of different acoustic instruments, the
AS50D has a range of input features, so it can accommodate instruments
with magnetic pickups, piezos and microphones – passive or condenser.
The digital FX, which include studio-quality Reverbs, are assignable to either or both channels, and can be balanced with FX in the FX Loop. The AS50D is the perfect amp for intimate acoustic gigs.
General MODEL AS50D RANGE ACOUSTIC TECHNOLOGY SOLID STATE CHANNELS 2 MASTER VOLUME YES Electronics WATTAGE 50W INPUTS 2 (+AUX&XLR) CONTROLS VOLUME, BASS TREBLE x 2, SPEED, DEPTH, BALANCE, REVERB LEVEL, ANTI FEEDBACK FREQUENCY, MASTER VOLUME Speakers SIZE 2 x 8" OUTPUT POWER (EACH) 25W NAME CELESTION IMPEDANCE 8 Ohm Accessories CABLES POWER Dimensions WEIGHT (KG) 16 DIMENSIONS in mm (W x H x D) 550 x 415 x 255 Other EFFECTS EFFECTS LOOP UNIQUE
Call us for a street price and availability
has 2 x 8”, 50 Watt + 50 Watt, specially designed Celestion® speakers,
and two high fidelity polymer dome tweeters for rich clean tones and
brilliant highs. Designed for a variety of different acoustic
instruments, the AS100D has a range of input features, so it can
accommodate instruments with magnetic pickups, piezos and microphones –
passive or condenser.
There are 16 digital FX to choose from, including 10 natural sounding digital Reverbs and a useful Anti-Feedback feature. For two pickup instruments, channels one and two can be linked so each pickup can be controlled independently.
The AS100D is the first choice for many professional acoustic musicians.
General MODEL AS100D RANGE ACOUSTIC TECHNOLOGY SOLID STATE CHANNELS 4 Electronics WATTAGE 50W + 50W INPUTS 4 (+AUX&XLR) CONTROLS VOLUME x 3, BASS/TREBLE x 2, MID, MID FREQ, SWEEP x 2, FX MIN x 2, AUX VOLUME, FX ADJUST x2, FX LEVEL, MASTER Speakers SIZE 2 x 8" 2 x TWEETERS OUTPUT POWER 50W NAME CELESTION IMPEDANCE 4 Ohm Accessories FOOTSWITCH PEDL-00001 INCLUDED (1 WAY WITH LED) CABLES POWER Dimensions WEIGHT (KG) 21 DIMENSIONS in mm (W x H x D) 605 x 530 x 270 Other EFFECTS EFFECT LOOP UNIQUE
|AS100D Footswitch - Single Footswitch with Status LED - (PED801) £39|
|ALL NEW DSL RANGE - SEE SEPARATE PAGE|
|2525H 2525C Mini Jubilee|
Head £749 (RRP £799)
Combo £899 (RRP £939)
The JCM25/50 Silver Jubilee Series was produced in 1987 to celebrate
25 years of Marshall Amplification and 50 years of Jim Marshall being in
the music business.
Inspired by this acclaimed series the 20 Watt Mini Jubilee combo and ‘small box’ head combine classic Silver Jubilee preamp tone, features and styling in a lower power, ‘mini’ design.
This contemporary ‘mini’ take on the Jubilee Series features: an ECC83 & EL34 valve-set, High/Low output switching, (20 Watt to 5 Watt), FX Loop and independent 4/8/16 Ohm speaker outputs. In keeping with classic Jubilee tone, Mini Jubilee features preamp circuitry taken from the 2555X which was launched in 2015 and made using the original diagrams.
The amp also features classic silver vinyl and chrome plated panelling to complete the Jubilee look.
The 2525 Mini Jubilee is expertly crafted and is designed, engineered and constructed to the highest possible standards at the Marshall factory in Bletchley, England.
|2536A MINI JUBILEE CAB|
Full features include: • 2 x 12” Celestion G12 ‘Vintage 30’ • 140 Watt Output • Classic Silver Jubilee vinyl covering • Side grip carry handles • Name plaque • Marshall script logo • 8 Ohm Mono
NORMAL PRICE £549
MEGA SALE BLOW OUT
ON NEW FLOOR STOCK
Call for price and availability
Jubilee™ Series was created in 1987 to celebrate the 25th anniversary of
the founding of Marshall Amplification® and the 50th year of Jim
Marshall® being in the music business, hence the Silver Jubilee’s
original ’25/50™’ designation. The limited edition all-valve Silver
Jubilee amplifiers looked stunning in silver vinyl covering with
chrome-plated control panel.
Based on JCM800™ 2203™ and 2204™ Master Volume models, the Jubilee amplifiers were the first Marshall® products with Pentode/Triode switching, which halves power output. The Jubilee Series featured an innovative, if somewhat unusual, preamp circuit which had three gain ‘modes’: ‘Clean’, Rhythm Clip, and footswitchable Lead Channel. The Bass, Middle, Treble & Presence controls, although shared between channels, were re-designed and offered more tonal variation than any other Marshall product had before.
The 100 Watt 2555™ Jubilee head caused a sensation when it was launched in January 1987 and, because it was produced only during the anniversary year, it has since become a collector’s piece. But perhaps the real reason the 2555 acquired legendary status is because of the playing public, who took it to their hearts. The 2555 was one of our most successful products out-right, and since it was discontinued in 1988 one of the most common questions we have been asked is, “when are you going to re-issue the 2555 Silver Jubilee?” So, by popular demand, we have created the 2555X, which is a modern re-issue of the 2555, with the same sonic characteristics and functionality.
The 2555X circuitry is taken from original 2555 diagrams and has been checked against the 2555 head in the Marshall museum. With modern production techniques we were also able to make some improvements to the electronics. Switching circuitry has been improved to avoid a relay flickering problem found on some original 2555s. Improved (DC) heaters ensure no noise. The introduction of external bias points on the chassis for re-valving and servicing. Black fibreglass wires that are high temperature and high voltage resistant. And the multi-pin connectors have been improved with higher insertion force and current capabilities but remain PVC, just like the originals.
There have been some feature improvements made to the 2555X. On the back panel the original 2555 had two speaker output jacks and a rather awkward Output Impedance Selector. For easier operation the 2555X has no selector and instead has five speaker output jacks ranging from 16 Ohm to 4 Ohm. We have also removed the Mains Voltage Selector from the back panel, as each 2555X amplifier is fixed to match the mains voltage of each country.
There are also some minor cosmetic differences between the 2555 and the 2555X: on the 2555X the handle end-caps are silver metal instead of black, the input jack nut is chrome instead of black plastic, and the Mains & Standby switches look slightly different to the ones on the 2555, as the originals are no longer produced.
/ 70W + 70W Stereo Cabinet
with G12 Vintage speakers
|JTM45™ 2245™ VINTAGE REISSUE|
MEGA SALE BLOW OUT
The very first Marshall® amp, made back in 1962, was the JTM45. It
was an instant hit and launched a whole new generation of groundbreaking
guitar players and sounds. Since then, connoisseurs of tone have sought
out rare original JTM45s from the ’60s. Now they shall seek no more,
thanks to this meticulously accurate re-issue.
It was GZ34 rectification that was the key to the JTM45’s sound, and this is a feature painstakingly reproduced in this re-issue. The way the rectifier interacts with the other valves causes subtle harmonics to shift and smoulder beneath every note, producing the unmistakable, original, and much emulated Marshall sound.
General MODEL 2245 (JTM45) RANGE VINTAGE TECHNOLOGY VALVE CHANNELS 2 Electronics WATTAGE 30W INPUTS 2 x 2 CONTROLS PRESENCE, BASS, MIDDLE, TREBLE, VOLUME 1, VOLUME 2 Speakers N/A Valves PRE AMP VALVES 2 x ECC83 POWER AMP VALVES 1 x ECC83, 2 x 5881 Accessories CABLES POWER/SPEAKER Dimensions WEIGHT (KG) 14.6 DIMENSIONS in mm (W x H x D) 665 x 265 x 205
|1936V™ Design Store|
1936V - Design Store GB MUSIC EXCLUSIVE
Design Store Bluesbreaker Cloth
2 x Celestion Vintage G12s
Design Store Mini Script Logo - Gold on White
(Shown with a lovely JTM45 - as they make a fine pair!)
GB Music £550 SALE ON FLOOR STOCK £475
The 18 Watt 1974X is a re-issue of the fabled 1974 dual channel, all-valve combo, produced between 1966 and 1968. Just like the original, the 1974X is hand soldered, with an aluminum chassis, and has a valve-driven Tremolo circuit. Its two-channel design is straightforward and effective – just volume and tone controls on channel one and volume, tone, speed and sensitivity on the Tremolo channel.
Because of its lower Wattage, the 1974X power valves will overdrive sooner than an amp of higher power. This means that the 1974X produces harmonically rich and sensitive, vintage Marshall tones at volumes that won’t shift your hearing; this is great for the studio and gives you greater control of live sound. That said, flat out it still packs quite a punch for gigs too!
The T1221/67 Greenback speaker used in the original 1974 combo would mature over time, with its sound softening with age. The special 12″ Celestion G12M-20 Greenback in the 1974X has been ‘aged’ to get as close as possible to that vintage, worn in, ’60s vibe.
List £1600 GB Music £1199
IN STORE DISPLAY STOCK ALSO AVAILABLE FOR £1095
General MODEL 1974X RANGE HANDWIRED TECHNOLOGY VALVE CHANNELS 2
Electronics WATTAGE 18W INPUTS 2 x 2 CONTROLS TONE & VOL x2, SPEED, INTENSITY
Speakers SIZE 1 x 12" OUTPUT POWER (EACH) 20W NAME CELESTION G12M-20 IMPEDANCE 15 OHM
Valves PRE AMP VALVES 2 x ECC83 POWER AMP VALVES 1 x ECC83, 2 x EL84 RECTIFIER 1 x EZ81
Accessories FOOTSWITCH PEDL-10034 INCLUDED (VINTAGE) CABLES POWER
Dimensions WEIGHT (KG) 19 DIMENSIONS in mm (W x H x D) 610 x 535 x 230 Other TREMOLO
Talk to us about any Marshall re-issue model
we'll check availability and price for you.
|Inputs 1 Speakers Speaker configuration
1x12" Power handling 80w Speaker model Celestion Seventy-80 (16Ω, 80w)
Unit impedance 16Ω Dimensions Weight (kg) 13.5 Width (mm) 500 Height
(mm) 470 Depth (mm) 290
This single 12″ mono speaker cabinet delivers quality beyond its size. It’s idea for use with the DSL1 or DSL20 head, or as an extension cab - can be paired with any compatible Marshall amp. The excellent value for money MX112 is loaded with a Celestion Seventy 80 speaker. 16ohms input £229 GB Music £139
The small yet powerful 1912 cab can be run as a single cab, or be paired with another 1912 for a stereo setup. Its compact design and lighter weight, together with its full-grip side handles, make it ideal for smaller gigs. But don’t be fooled by its size; the 1912’s impressive 150 Watts kick out stacks of volume. Loaded with a Celestion® G12B-150, which has a larger voice coil (2”) than the GT12-Ts (1.75”) found in the 1960A/B, the 1912 produces richer lower-mid frequencies.
GB Music From £299
(Custom made "Design Store" versions
One with Bluesbreaker Grill Cloth and Gold Piping, G12B150, Vintage
Plexi Amp Logo
|General MODEL 1912 WEIGHT (KG) 14.6 DIMENSIONS in mm (W x H x D) 510 x 465 x 290 Electronics WATTAGE 150W INPUTS 1 Speakers SIZE 1 x 12" OUTPUT POWER 150W NAME CELESTION G12B-150 IMPEDANCE 8 Ohm MONO|
|What is the Marshall Exclusive
This speaker uses a 2” diameter voice coil which gives it a very solid bottom end and quite a dark neutral top end with very little sparkle.”
Nominal Diameter - 12” Power Rating - 150W Nominal Impedance - 8ohm Sensitivity - 98 db/W Chassis Type - Pressed steel Voice Coil Diameter - 2” Voice Coil Material - Round copper Magnet Type - Ceramic Magnet Weight - 50oz Frequency Range - 60-4000Hz Resonance Frequency - 77Hz DC Resistance - 7ohm Unit Weight - 4.8kg
The perfect extension cabinet for 2x12 combos that’s compact enough for life on the move. Don’t be fooled by its smaller size, it definitely delivers the boost you need for larger venues thanks to the two Celestion G12-75 speakers and 150w of power.
Loaded with just two Celestion® G12T-75 speakers, the 1936 makes great sense if you want the classic Marshall sound and look, but have restricted space – whether that’s on stage or in your project studio. It makes for a striking alternative to a 2 x 12” combo. The G12T-75 speakers have a slightly softened high-frequency response, so are great for higher gain, modern tones. The 1936 can be used in mono or stereo mode, without the need to switch.
|General MODEL 1936 WEIGHT (KG) 24.6 DIMENSIONS in mm (W x H x D) 740 x 600 x 305 Electronics WATTAGE 150W INPUTS 2 Speakers SIZE 2 x 12" OUTPUT POWER 75W EACH NAME CELESTION G12-75 IMPEDANCE 8 Ohm MONO, 16 Ohm STEREO|
GB Music £599
Two Second Hand cabs in stock
|The 1960A is the world’s
best selling 4 x 12” speaker cabinet, with a heritage that stretches
back to the early 1960s. This authentic 4 x 12” cabinet design, which
has changed little since 1962, is the touchstone for all other angled 4
x 12” cabs.
The 300 Watt 1960A has excellent sound projection, which is achieved by angling the baffle so that the top two speakers face upwards slightly, allowing higher frequencies to really cut through. The angle also makes for a better onstage sound, as the sound focus is up towards you, rather than straight out.
General MODEL 1960A WEIGHT (KG) 36.4 DIMENSIONS in mm (W x H x D) 770 x 755 x 365 Electronics WATTAGE 300W INPUTS 2 Speakers SIZE 4 x 12" OUTPUT POWER 75W EACH NAME CELESTION® G12-75 IMPEDANCE 16/4 Ohm MONO, 8 Ohm STEREO
|Other Marshall productss to order - in fact call us about anything you'd like to buy!|
|READ MORE: https://marshall.com/marshall-amps/products/amps/vintage-reissues|
|For sounds of the 60’s, 70’s and 80’s - along with the Anniversary series above - these amps are for you. They are for those that want to recreate the nostalgic music memories. These sophisticated, stylish and classic amps allow you to perform your personality on stage. From the JTM45 to the JCM800 all the legendary Marshall tone you can imagine is packed into this series. Call us to discuss availability and prices.|
|Covers, Accessories, Casters, Trays - Call us|
Professional Covers supplied recently
|MARSHALL BASS ? YEP STILL AROUND IN SMALL QUANTITIES FOR THE PRACTICE PLAYER|
TWO CHANNELS - MODERN & CLASSIC
GB Music £149 SOLD OUT
At just 30 Watts with single 10″ speaker the MB30 packs all the Marshall power needed for a serious small bass amp. With two channels, Modern and Classic, and a three band passive EQ network featuring a mid Voice control, the MB30 is sonically flexible, while its small size makes it very portable, and big enough to entertain a small crowd. The MB30 also features an emulated DI out and a built in switchable Compressor on the Modern channel, great for recording too.
|* NORMALLY IN STOCK
** NORMALLY TO ORDER 4-5 DAYS ***
NORMALLY IN STOCK OR S-HAND AVAILABLE
(PLEASE PHONE TO CHECK CURRENT STOCK SITUATION)
pages can be subject to development revision